3c33ddb1

9.15. Steering wheel

MODELS WITHOUT SAFETY CUSHION

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Establish forward wheels for the movement directly forward.
3. Remove the button of a sound signal from a steering wheel and disconnect the electric socket.
4. The screw-driver unbend a short mustache of fixing of a nut of fastening of a steering wheel
5. Unscrew a nut of fastening of a steering wheel.
6. Put tags of combination of a steering wheel and a steering shaft.
7. Using a stripper, remove a steering wheel and a spring from a steering shaft.
8. Establish a spring and a steering wheel on vents of a steering shaft. At the same time combine the tags made at removal of a steering wheel.
9. Establish a new spring washer and screw a nut of fastening of a steering wheel, having tightened it the required moment.
10. The screw-driver unbend a short mustache of fixing of a nut of fastening of a steering wheel.
11. Connect the electric socket to the button of a sound signal and install the button in the center of a steering wheel.
12. Connect the accumulator and check action of a sound signal.

MODELS WITH THE SAFETY CUSHION

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
Prevention

You make further actions not earlier than in 1 minute that the condenser of the airbag was discharged completely.


2. Establish forward wheels for the movement directly forward.
3. Unscrew two screws from a back part of a steering wheel.
4. Being careful, remove the safety airbag.
5. Disconnect the electric socket from a safety cushion.
6. In the presence disconnect the electric socket from the switch of control of the radio receiver.
7. The screw-driver unbend a short mustache of fixing of a nut of fastening of a steering wheel. Completely unscrew bolts of fastening of a wheel and remove a wheel.
8. Unscrew and remove a nut of fastening of a steering wheel.
9. Remove a spring washer.
10. Apply combination tags on a steering wheel and a steering shaft.
11. Using a stripper, remove a steering wheel from grooves of a steering shaft.
12. At removal of a steering wheel pass an electrical wiring of control of the radio receiver through an opening of a steering shaft.
13. Establish a steering wheel on vents of a steering shaft and pass through an opening of a steering wheel of a wire of control of the radio receiver.
14. Establish a washer, screw a nut of fastening of a steering wheel, having tightened it the required moment. Record a nut from an otvorachivaniye a washer uvula bending.
15. Connect the electric socket of the switch of control of the radio receiver
16. Install the safety airbag, previously having connected the electric socket. Fix a pillow by screws.
17. Connect the accumulator.