8.2. Technical characteristics
| Forward disk brakes | |
| Type |
ventilated
|
| Diameter of a disk: | |
| – all models except 2.0 liters (X20XEV engine) |
256 mm
|
| – 2.0 liter (X20XEV engine) |
288 mm
|
| Maximum beating of a disk |
0.1 mm
|
| The minimum thickness of a brake shoe (including the support plate) |
7.5 mm
|
| The minimum thickness of a disk after machining: | |
| – all models except 2.0 liters (X20XEV engine) |
22 mm
|
| – 2.0 liter (X20XEV engine) |
23 mm
|
| Back disk brakes | |
| Type |
continuous
|
| Diameter: | |
| – all models except 2.0 liters (X20XEV engine) |
270 mm
|
| – 2.0 liter (X20XEV engine) |
286 mm
|
| Maximum beating of a disk |
0.1 mm
|
| The minimum thickness of a brake shoe (including the support plate) |
7.0 mm
|
| The minimum thickness of a disk after machining |
9.0 mm
|
| Minimum thickness of a block of the emergency brake (only slip) |
1.0 mm
|
| Back drum brakes | |
| Internal diameter |
230 mm
|
| Maximum internal diameter |
231 mm
|
| Minimum thickness of a brake shoe |
0.5 the mm is higher than a rivet head
|
| System type |
ABS
|
| – all models except 2.0 liters (X20XEV engine) |
ABS 415
|
| – 2.0 liter (X20XEV engine) |
ABS 5/JC
|
| Type of brake fluid | |
| – all models |
liquid for a hydraulic system of DOT 3 or DOT 4, or SAE J1703
|
Tightening moments
| The ABS control unit to the hydraulic modulator: | |
| – stage 1 |
6 Nanometer
|
| – stage 2 |
7 Nanometer
|
| Screw of fastening of a brake disk |
4 Nanometer
|
| Connection of brake pipelines |
16 Nanometer
|
| Pumping union |
9 Nanometer
|
| Forward support |
30 Nanometer
|
| Holder of a forward support |
95
|
| Lever of the emergency brake |
10 Nanometer
|
| Indicator of the lever of the emergency brake |
2.5 Nanometer
|
| Hydraulic modulator (ABS) |
8 Nanometer
|
| The main brake cylinder to the vacuum amplifier of brakes |
22 Nanometer
|
| Pedal arm |
20 Nanometer
|
| Screw of fastening of the back brake drum |
4 Nanometer
|
| Back support |
80 Nanometer
|
| Back working brake cylinder |
9 Nanometer
|
| Wheel speed sensor |
8 Nanometer
|
| Vacuum hose to an inlet collector |
18 Nanometer
|
| Vacuum hose to the vacuum pump (diesel engines) |
18 Nanometer
|
| Nuts of the vacuum amplifier |
20 Nanometer
|