7.3.5. Selector cable

Removal and installation

1. Remove the central console and install the selector lever in situation P.
2. Using an edge of the thin screw-driver (it is specified by an arrow) as the lever, remove a cable of the selector (2) from spherical hinged connection (3) at the selector lever basis. Release a selector cable from a forward part of an arm of the lever of the selector.
1 – fastening bracket.
3. Remove the accumulator and a support of the accumulator.
4. Remove a selector cable from the lever of the choice of transfers on the transmission. Remove a selector cable cover from an arm.
5. Disconnect a selector cable from all brackets of fastening. Take a sealing ring of a cable of the selector from a partition of a motor compartment and take a selector cable.
6. Installation is made in the sequence, the return to removal, at the same time it is necessary to adjust a selector cable.