3c33ddb1

7.3.4. Adjustment of the lever of the selector


Prevention

If shutdown of the accumulator is made with the selector lever in situation P, the lever will be fixed in this situation.


PERFORMANCE ORDER
1. For release of the lever from fixing remove finishing of the lever of the selector and, using an edge of the thin screw-driver, press the clamp lever on the left forward side of the lever of the selector.
2. Move the selector lever to all provisions and check that the included transfer correctly is displayed on the indicator of position of the lever of the selector.
3. Install the selector lever in situation P.
4. For access to a cable of the choice of transfers remove the accumulator and a support of the accumulator.
5. Take a bracket of blocking and release a cover of a cable of the choice of transfers from an arm on the top part of the transmission.
6. Check that the lever of the selector (1) is installed in situation P (2), then move the lever to all provisions and establish it in a starting position. Record a selector cable cover pressing of a bracket of blocking before click.
7. Install the accumulator and check operation of the lever of the selector.