3c33ddb1

7.1.5. Working cylinder of coupling

Removal

PERFORMANCE ORDER
1. Remove the transmission.
2. Unscrew a connecting nut and disconnect a hydraulic pipe (A) from the coupling cylinder. Unscrew three bolts of fastening (V) and remove the working cylinder of coupling from an entrance shaft of the transmission. Remove a sealing ring.

Installation

PERFORMANCE ORDER
1. Check that the interfaced surfaces of the working cylinder of coupling and a case of the transmission pure and dry, and establish a new sealing ring in a transmission flute.
2. Oil the working cylinder of coupling and establish it into place, pulling over a main shaft of the transmission. Check that the sealing ring is in a transmission case flute, and fix the working cylinder by bolts.
3. Connect a hydraulic pipe to the working cylinder of coupling.
4. Install the transmission.