6.4.4. Elements of system of prestarting heating of 1,7 l
CONTROL UNIT OF SYSTEM OF PRESTARTING HEATING
The block is located on the left forward side of a motor compartment.
Removal and installation
PERFORMANCE ORDER |
1. Remove a weight wire from the accumulator. |
2. Unscrew a nut of fastening of the block. |
3. Disconnect the electric socket from the block basis, unscrew two nuts and remove wires of giving of tension. Remove the block. |
4. Installation is made in the sequence, the return to removal. |
|
ELEMENT OF HEATING OF THE FUEL FILTER
Removal and installation
PERFORMANCE ORDER |
1. Remove the fuel filter. |
2. Remove a weight wire from the accumulator. Disconnect the electric socket from a heating element. |
3. Unscrew the central bolt and remove a heating element from a casing of the fuel filter. |
4. Establish a new sealing ring in dredging of an element of heating, establish a heating element on a casing of the fuel filter and fix by the central bolt. |
5. Connect the accumulator and install the fuel filter. |
|