1. Lift a forward part of the car and record on supports. Remove a mudguard. Remove a weight wire from the accumulator. |
SOCH engine of 1,6 l and engines 1,8 and 2,0 of l |
2. Remove a casing of the air filter and the inlet channel of air. |
3. Weaken a tension of an auxiliary driving belt and remove it from a generator pulley. |
4. Unscrew a bolt and remove draft of the compensator of torque from the right part of a head of the block of cylinders. |
5. Unscrew bolts and remove an arm of fastening of the generator to a final collector and a head of the block of cylinders. |
6. Remove a rubber cover, unscrew nuts and disconnect electric wires from the generator. |
7. Unscrew bolts of fastening of the lower arms of the generator to the block of cylinders and take the generator from a motor compartment. |
8. Unscrew bolts of fastening of the lower arm of the generator to the generator and remove an arm from the generator. |
Petrol DOCH engines of 1,6 l |
9. Weaken a tension of an auxiliary driving belt and remove it from a generator pulley. |
10. Unscrew bolts and separate the inlet channel of air from an inlet collector. |
11. Remove a rubber cover, unscrew nuts and disconnect electric wires from the generator. |
12. Unscrew bolts of fastening of the lower arm of the generator to the block of cylinders. |
13. Unscrew a bolt of fastening of thirst of the compensator of torque for the right side of a head of the block of cylinders. |
14. Unscrew the top bolt of fastening of the generator and take its top from a motor compartment. |
15. Unscrew bolts of fastening of arms to the generator and remove them from the generator. |
Diesel engine of 1,7 l |
16. Weaken a tension of an auxiliary driving belt and remove it from a generator pulley. |
17. Remove the vacuum pump of the brake system which is installed on a back part of the generator. |
Prevention
If the generator is not subject to replacement, the pump can be left on the generator. At the same time it is necessary to disconnect a vacuum hose and pipelines of supply of oil from the pump.
|
18. Disconnect the electric socket located on the wires going to the generator. |
19. Unscrew bolts of fastening of the generator and take the generator from under the car. |
Diesel engine of 2,0 l |
20. Weaken a tension of an auxiliary driving belt and remove it from a generator pulley. |
21. Remove a casing of the air filter together with an air inlet and the measuring instrument of a stream of air. |
22. Unscrew a bolt, the fixing arm of a plait of wires to a back part of the block of cylinders. |
23. Unscrew nuts and remove the heat-resistant screen of the generator. |
|
24. Unscrew nuts (are specified by shooters) and disconnect wires from the generator. |
25. Unscrew the bolt of fastening of an arm of the electromagnetic valve of the gate of a turbocharger located in the right corner of a motor compartment. Move the valve from the generator aside, without disconnecting from it wires or hoses. |
|
26. Unscrew the top bolt of fastening of the generator. |
|
27. Unscrew the lower bolt of fastening of the generator. |
28. Take it the generator from a motor compartment up. |
29. For removal of the generator merge cooling liquid from the cooling system. |
|
30. Disconnect a hose of cooling liquid from a back part of a head of the block of cylinders. |
|
31. Remove a casing of an exit of cooling liquid from a back part of a head of the block of cylinders. |
|
32. Remove the generator. |