3c33ddb1

3.5.8. Assembly of a head of the block of cylinders

PERFORMANCE ORDER
1. Oil cores of valves engine and insert them on the places. The valve establish on those places where they were ground in.
2. Establish a spring nest.
3. Install the thin-walled protective plug on a valve core.
4. For installation of maslootrazhatelny caps use a special metal mandrel.
5. Establish a valvate spring and a plate of a spring.
6. Special adaptation squeeze a valvate spring and establish crackers in dredging of a core of the valve and grease them. Remove the device for compression of a spring. Repeat this operation on other valves.
7. Knock with the hammer through wooden whetstone on a valve core end face in order that all elements of the valve accurately were established on the places.
8. On the SOCH engine of 1,6 l establish hydraulic pushers, blocks of axial pressure and levers
9. On all petrol DOCH engines install a head on the block of cylinders of the engine and establish pushers and camshafts in a head.
10. On diesel engines of 1,7 l install a head on the block of cylinders of the engine and establish pushers, adjusting laying and the camshaft in a head. Establish fuel nozzles and glow plugs.
11. On diesel engines of 2,0 l install a head on the block of cylinders and establish hydraulic pushers, levers and the camshaft.