3c33ddb1

3.4.9. Natyazhiteli of a chain

Removal

PERFORMANCE ORDER
Top natyazhitel
1. Remove a casing of the air filter.
2. Unscrew a bolt of fastening of the right support of the engine from a head of the block of cylinders.
3. Unscrew a tension mechanism head from a back part of a head of the block of cylinders and take a plunger.

Prevention

Do not turn a bent shaft of the engine at removal of the mechanism of a tension.


4. Examine a tension mechanism plunger on existence of wear or damages and if necessary replace it.
Lower natyazhitel of a chain
5. Lift a forward part of the car and record on supports.
6. Unscrew a head of the mechanism of a tension of the lower chain and take a plunger.

Prevention

Do not turn a bent shaft of the engine at removal of the mechanism of a tension.


7. Examine a tension mechanism plunger on existence of wear and damages and if necessary replace it.

Installation

PERFORMANCE ORDER
Top natyazhitel
1. Oil a tension mechanism plunger pure engine and insert it into a head of the block of cylinders.
2. Establish a new sealing ring to a head of the mechanism of a tension and screw up a head, having tightened the required moment.
3. Press a tension mechanism plunger head before click for the correct adjustment of the mechanism of a tension.
4. Establish the right suspension bracket of the power unit.
5. Establish a casing of the air filter.
Lower natyazhitel of a chain
6. Oil a tension mechanism plunger pure engine and insert it into place
7. Establish a head of the lower mechanism of a tension with a new sealing ring and tighten it the required moment. If the new mechanism of a tension is installed, press a pin in the central part of a head before click therefore the pin has to be pressed and come back to the place easily.