3c33ddb1

3.4.16. Replacement of sealing rings of a bent shaft

PERFORMANCE ORDER
Right sealing ring of a bent shaft
1. Remove a pulley of a bent shaft.
2. Using a screw-driver edge as the lever, take a sealing ring from a chain cover.
3. Clear a nest of a sealing ring and the condensed surface of a bent shaft.
4. Grease working edges of a new sealing ring with pure engine oil and, using a tubular mandrel, establish a sealing ring.
5. Remove all traces of oil and establish a pulley of a bent shaft.
Left sealing ring of a bent shaft
6. Remove a flywheel.
7. Drill two small openings in an end face of a sealing ring, screw in two self-cutting screws and flat-nose pliers for heads of screws extend a sealing ring from a nest.
8. Clear a nest of a sealing ring and the condensed surface of a bent shaft.
9. Grease working edges of a new sealing ring with pure engine oil and, using a tubular mandrel, establish a sealing ring into place.
10. Establish a flywheel.