3.3.6. Pulley of a bent shaft
Removal
| PERFORMANCE ORDER | ||||||
|
||||||
Installation
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engines
- 3.1. Repair of the SOCH engine installed in the car
- 3.2. Repair of the DOCH engine installed in the car
- 3.3. Repair of the diesel engine of 1,7 l installed in the car
- 3.3.1. Introduction
- 3.3.2. Technical characteristics
- 3.3.3. Check of pressure of compression
- 3.3.4. Top Dead Point (TDP) of the piston of the first cylinder
- 3.3.5. Cover of a head of the block of cylinders
- 3.3.6. Pulley of a bent shaft
- 3.3.7. Casings of a gear belt
- 3.3.8. Replacement of a gear belt
- 3.3.9. Mechanism of a tension of a gear belt and pulleys
- 3.3.10. Replacement of a sealing ring of a cam-shaft
- 3.3.11. Check and adjustment of gaps of valves
- 3.3.12. Cam-shaft and pushers
- 3.3.13. Head of the block of cylinders
- 3.3.14. Oil pallet
- 3.3.15. Oil pump
- 3.3.16. Oil heater
- 3.3.17. Flywheel
- 3.3.18. Replacement of sealing rings of a bent shaft
- 3.3.19. Replacement of support of the power unit
- 3.4. Repair of the diesel engine of 2,0 l installed in the car
- 3.5. Capital repairs of engines
- 4. Heating, ventilation
- 5. Fuel system
- 6. Systems of start, ignition
- 7. Transmission
- 8. Brake system
- 9. Running gear
- 10. Body
- 11. Electric equipment
- 12. Main malfunctions
