3.1.6. Pulley of a bent shaft
Prevention
For fastening of a pulley of a bent shaft it is necessary to use only a new bolt.
Removal
PERFORMANCE ORDER |
1. Lift a forward part of the car and record on supports. Remove the right forward wheel. |
2. Take off an auxiliary driving belt. |
3. Weaken a bolt of fastening of a pulley of a bent shaft. For prevention of rotation of a bent shaft on models with the mechanical transmission the assistant has to include any transfer and press a brake. On models with the automatic transmission unscrew one of bolts of fastening of the hydrotransformer and, using a steel core, fix a drive plate to a transmission case. |
4. Unscrew a bolt of fastening of a pulley of a bent shaft and remove a pulley. At the same time be careful not to damage the sensor of a bent shaft. |
|
Installation
PERFORMANCE ORDER |
|
1. Establish a pulley of a bent shaft (it is specified by an arrow) and fix it by a new bolt (it is specified by an arrow). |
2. Record a bent shaft from a provorachivaniye by the same method, as when weakening a bolt of fastening of a pulley of a bent shaft. |
|
3. Tighten a bolt of fastening of a pulley of a bent shaft in three stages. |
|