3.1.18. Suspension bracket of the power unit
Check
| PERFORMANCE ORDER |
| 1. For improvement of access to a suspension bracket of the power unit lift a forward part of the car and record on supports. |
| 2. Check a condition of rubber elements of a suspension bracket for existence of cracks, aging and stratification. |
| 3. Check reliability of fastening of engine mounts. |
| 4. Moving the engine here and there, check a side play in engine mounts. New elements of suspension brackets have to have an insignificant side play even. |
|
Replacement of a forward suspension bracket
| PERFORMANCE ORDER |
| 1. Unscrew bolts and remove draft of compensation of torque on the right side of the engine. |
| 2. Lift a forward part of the car and record on supports. |
| 3. Establish a jack under the engine and through wooden whetstone raise the engine until all weight of the engine is not perceived by a jack. |
| 4. Unscrew a nut of fastening of a suspension bracket to a forward lower frame and the top nut of fastening of a suspension bracket to the power unit. |
| 5. Raise the engine and take a support of a suspension bracket of the power unit. |
| 6. Check all elements of a suspension bracket for signs of wear and if necessary replace. |
| 7. Establish a suspension bracket support into place and fix by bolts. |
| 8. Lower the car and establish draft of compensation of torque. |
|
Replacement of a back suspension bracket
| PERFORMANCE ORDER |
| 1. Unscrew bolts, remove draft of compensation of torque on the right side of the engine. |
| 2. Lift a forward part of the car and record on supports. |
| 3. On models with the mechanical transmission weaken tightening a bolt of a rod of gear shifting and remove a gear shifting rod from draft of management. |
| 4. On models with the automatic transmission disconnect a cable of the choice of transfers from the transmission. |
| 5. Establish a jack under the engine and through wooden whetstone raise the engine until all weight of the engine is not perceived by a jack. |
| 6. Unscrew the bolts fixing a back suspension bracket of the power unit to the lower frame and take it from under the car. |
| 7. Establish a new back suspension bracket of the power unit and attach it bolts to the lower frame. |
| 8. Lower the engine and take a jack from under the car. |
| 9. On models with the mechanical transmission repeatedly connect a rod of gear shifting and, if necessary, adjust the gear shifting mechanism. |
| 10. On models with the automatic transmission connect a cable of the choice of transfers. |
| 11. Lower the car and establish draft of compensation of torque. |
|
