1. Merge fuel from the fuel filter. |
2. Disconnect electric sockets from the temperature switch and a heater which are located between a plate of installation and the fuel filter. |
3. Unscrew couplings and disconnect fuel-supply lines from the filter. |
4. Unscrew nuts and remove the filter from a partition of a motor compartment. Separate the filter from the protection cover. |
5. Unscrew the filter and remove sealing rings from a filter head. |
6. Establish new sealing rings in the top part of the new filtering element. |
7. Grease sealing rings with fuel and screw up the new filter, tightening only it a hand. |
8. Fix a bolt at the fuel filter and the protection cover on a partition of a motor compartment. |
9. Repeatedly connect fuel-supply lines with new sealing washers. Connect electric sockets to the temperature switch and an element of heating. |
10. Start the engine and check tightness of fuel system. |