11.1.7. Bulbs of external lighting
Before replacement of a bulb of external lighting check the corresponding electric chain and a safety lock. Do not concern a glass flask of a lamp barehanded. The fingerprint evaporates and besieged on a reflector therefore lighting worsens. Surely replace the failed lamps with lamps of the same type. Wipe the spots arising on imprudence from touches with a pure lint-free rag or alcohol.
HEADLIGHTS
PERFORMANCE ORDER |
|
1. Open a cowl and remove a back cover from a headlight. Pay attention that an internal headlight for passing beam, and an external headlight for driving beam. During the work on a left headlight it is necessary to remove the relay block from a forward part of the accumulator temporarily. |
|
|
2. Remove the electric socket from a bulb of a headlight of driving and passing beam. |
|
3. Squeeze spring brackets of fastening of a bulb and move brackets aside. |
|
4. Take a lamp from the high beam headlamp. |
|
5. Release brackets of fastening of a bulb of a headlight of passing beam. |
|
6. Remove a bulb from a headlight of passing beam. |
7. Establish a new bulb in the sequence, the return to removal. |
|
FORWARD DIMENSIONAL LAMP
PERFORMANCE ORDER |
1. The lamp of a dimensional forward lamp is located in the high beam headlamp. Remove a back cover from a headlight. |
|
2. Take a cartridge with a bulb of a dimensional lamp from a back part of a headlight. |
3. Take a bulb from the boss. |
4. Establish a new bulb in the sequence, the return to removal. |
|
FORWARD INDEX OF TURNS
PERFORMANCE ORDER |
1. Open a cowl and the screw-driver release the top bracket of fastening from outer side of a headlight. |
2. Take the forward index of turns from grooves in a headlight forward. |
|
3. Turn a cartridge with a bulb and take it from the forward index of turns. |
|
4. Press and turn a bulb for extraction it from the boss. |
5. Establish a new bulb in the sequence, the return to removal. |
|
FORWARD FOG LIGHT
PERFORMANCE ORDER |
1. Uncover a back part of the fog light located in a front bumper. |
2. Disconnect the electric socket, weaken a bracket of fastening and take a bulb with a fog light. |
3. Establish a new bulb in the sequence, the return to removal. |
|
SIDE REPEATER OF TURNS
PERFORMANCE ORDER |
|
1. Using an edge of the thin screw-driver as the lever, take the side repeater of turns from an overlay of a forward wing. |
|
2. Holding a cartridge of a bulb, turn the side repeater of turns and remove it from the boss. |
|
3. Take a bulb from the boss, having pulled it on themselves. |
4. Establish a new bulb in the sequence, the return to removal. |
|
BACK LAMPS
PERFORMANCE ORDER |
1. Remove the finishing of the luggage compartment located opposite to back lamps. |
|
2. Press the fixing uvula in the middle of the holder of bulbs of a back lamp and take the holder of bulbs from a lamp. |
|
3. Press and turn a bulb and take it from the holder of bulbs. |
4. Establish a new bulb in the sequence, the return to removal. |
|
LAMP OF ILLUMINATION OF REGISTRATION PLATE
PERFORMANCE ORDER |
1. Open a luggage carrier or a back door, then insert an edge of the thin screw-driver vertically between the right edge of a lamp of illumination of registration plate and a rear bumper. Weaken a clamp and take a lamp of illumination of registration plate from a bumper up. |
2. Press a bracket of fastening and remove a plafond from a lamp of illumination of registration plate. |
3. Press and turn a bulb for removal it from the boss. |
4. Installation of a new bulb is made in the sequence, the return to removal. |
|
TOP STOPLIGHT
PERFORMANCE ORDER |
1. Open a back door and remove an upholstery of finishing of a back part of salon. |
|
2. Remove the caps closing screws. |
|
3. Unscrew screws and remove a frame together with the top stoplight. |
|
4. Separate a stoplight lamp from a frame. |
|
5. Remove a casing from the holder of bulbs |
|
6. Using the screw-driver, release clamps |
|
7. Remove a strip with glow lamps from the holder. |
|
8. Disconnect the electric socket and remove a strip with incandescence bulbs. |
9. Installation is made in the sequence, the return to removal. |
|