10:38. Dashboard



1. Remove a weight wire from the accumulator.

After a detachment of the accumulator wait at least 1 minute in order that condensers of a control system of a safety cushion were discharged.

2. Remove a steering wheel.
3. Disconnect a wire from the safety airbag.
4. Remove switches of a screen wiper and turns.
5. Remove the ignition lock.
6. Remove the control unit of an immibilayzer.
7. From the driver remove finishing of the lower part of the dashboard.
8. Disconnect and remove an air duct.
9. Remove the radio receiver.
10. Remove the control unit of a heater.
11. Remove air ducts.
12. Remove a ware box.
13. Remove the central console.
14. In the presence, remove a safety cushion from the passenger.
15. Remove internal finishing of forward racks.
16. From under the panel uncover, closing pipelines of cooling liquid.
17. Remove air supply nozzles to a windshield from a forward part of the panel.
18. Remove side finishings of niches for legs.
19. Remove air ducts of heating of the left and right side.
20. Disconnect brackets of fastening of a plait of wires to an arm.
21. Lift a plait of wires from an arm.
22. Unscrew lower (arrows) and the top screws of fastening of an arm of a plait of wires, located under the dashboard.
23. Disconnect the electric socket of a plait of wires located on the right side of a motor compartment.
24. Unscrew a bolt and disconnect the grounding tire from the basis of a forward rack. Also disconnect the grounding tire from an arm of a steering column.
25. Remove the hydraulic modulator of the ABS system, then disconnect the electric socket of a plait of wires and take a plait in interior of the car.
26. Uncover the block with fuses, unscrew a bolt and remove the block.
27. Unscrew the bolts fixing the dashboard to a partition of a motor compartment and remove it together with electric wires.


Installation is made in the sequence, the return to removal.