10.13.2. Back door


1. Remove a weight wire from the accumulator.
2. Open a back door and remove a loudspeaker lattice.
3. Remove the lower plastic cap from the handle of opening of a door.
4. Remove the top cap or the switch of the power window.
5. Unscrew the top screws of fastening of the internal handle of opening of a back door.
6. Remove the handle of opening of a door.
7. Completely close a window and note a window regulator handle arrangement.
8. Release a bracket of fastening and remove the handle.
9. The bracket is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits.
10. Remove a window regulator handle washer.
11. Remove a plastic decorative slip from the top part of a back door.
12. Unscrew the screws fixing the basis of an upholstery of a back door.
13. Using the screw-driver with a wide edge, separate a door upholstery from a door.
14. Remove a door upholstery from the button of blocking of a door.
15. If it is necessary, remove a protective film from the inside of a door


Installation is made in the sequence, the return to removal.