10.13.1. Forward door


1. Remove a weight wire from the accumulator.
2. Open a forward door and, having pulled on themselves, remove the handle of adjustment of an external mirror.
3. Then, using a screw-driver edge as the lever, remove a decorative overlay of the handle of a mirror.
4. Remove a noise isolation.
5. Using a screw-driver edge as the lever, remove the lower overlay of the internal handle of opening of a door.
6. Also using the screw-driver, remove a cap or the switch of a mirror with electroheating from the top party of the handle of opening of a door.
7. Using the screw-driver, remove a loudspeaker lattice.
8. Unscrew screws of fastening of the handle of a door.
9. Remove the door handle.
10. Disconnect wires from a loudspeaker.
11. On models with a manual window regulator completely close a window and note a window regulator handle arrangement. Release a bracket of fastening and remove the handle. The bracket is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits.
12. Unscrew screws at the door upholstery basis.
13. Then using the screw-driver with a wide edge, separate a door upholstery from a door.
14. If it is necessary, remove a protective film from a door.


Installation is made in the sequence, the return to removal.